Geberit urinal flush control with electronic flush actuation, mains operation, cover plate type 10

• Geberit
• 1 x urinal flush control with electronic flush actuation
• For automatic flush release of urinals
• For Geberit mounting elements for urinals with front actuation
• For installation in body shell sets for Geberit urinal flush controls (from year of manufacture 2009)

Scope of delivery

• Type 10 cover plate
• with IR window
• Infrared control, pre-assembled on mounting frame
• Solenoid valve
• Power supply unit
• Mounting material

Technical data

• Protection class: IP45
• Rated voltage: 110-240 V AC
• Mains frequency: 50-60 Hz
• Operating voltage: 4.5 V DC
• Power consumption: < 0.5 W
• flow pressure: 100-800 kPa
• Maximum test pressure water: 1600 kPa
• Maximum test pressure air / inert gas: 300 kPa
• Relative humidity: < 100 %
• Maximum water temperature: 30 °C
• flow rate at 100 kPa without flow limiter : 0.3 l/s
• flow rate at 100 kPa with flow limiter : 0.18 l/s
• Calculation flow rate: 0.22 l/s
• Minimum flow pressure for calculation flow rate: 100 kPa
• Interval flush Setting range: 1-168 h
• Interval flush Factory setting: 24 h
• Interval flush time Setting range: 3-180 s
• Interval flush time Factory setting: 5 s
• Dwell time Setting range: 3-15 s
• Dwell time Factory setting: 7 s
• Flush time Setting range: 1-15 s
• Flush time Factory setting: 7 s

Properties

• Cover plate with safety latch
• Safe IR distance detection
• IR sensor self-adjusting
• Adjustable water-saving hybrid mode
• Manually adjustable flush time
• DYNAmic flush time adjustment
• Adjustable pre-rinse
• Can be switched to operation with lid urinal
• Power supply via mains connection
• Power supply unit with LED display
• Valve closure function in case of power failure
• Functions can be set and queried with Geberit Service mobile phone
• Flush trigger can be deactivated via Geberit Clean mobile phone
• Flush volume can be reduced to 0.5 litres per flush using the throttle screw of the pipework set
• Fitting group II according to DIN 4109